The Ulti-Mate sign support system is available in 12 and 14 gage steel complying with ASTM specification A653, hot dip galvanized conforming to coating designation G‑140 for excellent corrosion prevention.

* Available with 7/16" holes on 1" centers on 2 or 4 sides (11.1 mm on 25.4mm centers).

* The Ulti-Mate sign support system is completely compatible with all existing square posts.

* Mating tube sections allow for fast, safe ground level installations.

* Ground anchor posts allow for rapid replacement installations when necessary.

* Square tube sections provide superior resistance to wind and other forces over U-channel or round posts.

* The Ulti-Mate sign support system provides four flat surfaces for mounting signs in any direction and at any height without the need for additional hardware.

* FHWA approved as meeting safety requirements for sign supports.

* Custom sign support colors available on request.

DIRECT
INSTALLATION

The Ulti-Mate sign post can be installed directly into the ground using power equipment or a sledgehammer with driving cap.

EZ
INSTALLATION

The Ulti‑Mate 12 gage anchor system allows crews to work at ground level for fast installations and replacements. The Ulti‑Mate anchor is installed directly into the ground, leaving 1 or 2 holes above grade level. The Ulti‑Mate sign post slides into the anchor for safe and easy installations.

HI-IMPACT INSTALLATION

The Ulti‑Mate double 12 gage system is for areas that require frequent replacements due to damaged sign posts. This unique method utilizes a two‑piece breakaway anchor that makes replacement work fast and safe.

AVAILABLE PRODUCTS

Ulti-Mate

Colors...

Unlimited

The Ulti‑Mate® square steel tube sign support system is now available in four standard colors and an unlimited number of custom colors to fit your every need. All colors will be produced utilizing a Polyester TGIC Powder Coating in a high‑gloss finish. In field tests, powder coating has shown to outlast all other known finishes for color intensity and durability. Applied to conform with the manufacturer's specification of a minimum of 2-mil thickness, the powder coating will be applied after all fabrication, cutting and punching has been completed. The finished product will be custom packaged in order to protect the post during the shipping process. Now you can have the Ulti-Mate Sign Support System in your favorite color!